We had an interrupted week of learning; even without much snow!
Students should have shown to Mr. Zartler, and had entered into the grade book successful and on time completion of steps 1 - 3A on the cutting board protocol sheet. Students must still complete these steps, but at this point the work is late. (Jointer practice is NOT required.)
NOTE: Wood ID TEST will be 3/5 or 3/6 (5th period will be 3/11). The test will be CLOSED notes (but an example of the study notes are below).
It is important to remember that ONLY ONE (1) strip should be cut off a four square board at a time. After each strip is cut off at the band saw; the main board will need to be re-squared at the table saw.
Analytical Chart for Wood ID:
Students should have shown to Mr. Zartler, and had entered into the grade book successful and on time completion of steps 1 - 3A on the cutting board protocol sheet. Students must still complete these steps, but at this point the work is late. (Jointer practice is NOT required.)
NOTE: Wood ID TEST will be 3/5 or 3/6 (5th period will be 3/11). The test will be CLOSED notes (but an example of the study notes are below).
It is important to remember that ONLY ONE (1) strip should be cut off a four square board at a time. After each strip is cut off at the band saw; the main board will need to be re-squared at the table saw. Analytical Chart for Wood ID:
No comments:
Post a Comment